Roll-Over Valve Control module (ROVCM) Nytro

ROVCM

« Back to Album Photo 1 of 7 Previous | Next
ROVCM
Custom engineered and made for Four Stroke Solutions LLC Gen 3 Roll-Over Valve kits. The module contains a micro-controller and uses pulse width output to control the roll-over shut-off valve. Pulse width control allows the module to command a higher output signal to close the shut-off valve faster/stronger then using straight battery voltage alone. Once the shut-off valve is closed, the ROVCM switches to hold mode. In hold mode the shut-off valve remains closed and current draw is reduced by approximately 1/3 when compared to using straight battery voltage. Benefits include, reduced valve operating temperatures and reduced current draw on the battery. Ideal for smaller light weight batteries. Additionally the ROVCM has a battery voltage monitoring/auto shut down feature. The micro-controller inside the ROVCM monitors how long the roll-over valve has been closed. If the ROVCM detects that the roll-over valve has been on for longer then two hours, the ROVCM starts to monitor battery input voltage. If the input voltage drops to approximately 12.1 volts, the ROVCM will shut down the roll-over valve to help prevent accidentally dis-charging the battery, due to forgetting to turn off the roll-over valve!
Posted by ★ Owner on December 18, 2011 Full Size| Slideshow

Post a Comment

Oops!

Oops, you forgot something.

Oops!

The words you entered did not match the given text. Please try again.

0 Comments